Electronic Control Unit - 2005-2006 Ford Escape 3.0L V6 - A1 Cardone - M289710

Interchange Part Number

5L8A12A650AAA, 5L8A12A650AAB, 5L8A12A650AAC, 5L8A12A650AAD, 5L8A12A650AYA, 5L8A12A650LC, 5L8A12A650LD, 5L8A12A650LE, 5L8A12A650LF, 5L8A12A650LG, 5L8A12A650LH, 5L8Z12A650AAA, 5L8Z12A650AAB, 5L8Z12A650AAC, 5L8Z12A650AAD, 5L8Z12A650AYA, 5L8Z12A650LC, 5L8Z12A650LD, 5L8Z12A650LE, 5L8Z12A650LF, 5L8Z12A650LG, 5L8Z12A650LH, 6L8A12A650XA, 6L8A12A650XB, 6L8Z12A650XA, 6L8Z12A650XB, 6U7A12A650BTA, 6U7Z12A650BTA, AJC818881A, AJC818881B, AJC818881C, AJTT18881A, L3T118881, ZZC118881ROA, ZZC618881

Make:

Model:

Year:

Description

The 2005-2006 Ford Escape electronic control unit has several functions besides regulating and maintaining the air/fuel ratio that your engine needs. This system controls ignition timing, fuel injection, idle speed, variable valve timing, and the air/fuel mixture. It gathers data from dozens of different sensors to determine the best spark timing, as well as the amount of oxygen in the exhaust gas and the optimum coolant temperature. The electronic control unit helps lower emissions and improves mileage. This device is located behind the radio in the center console. Car owners can upgrade the electronic control unit for better performance. Ford Escape Electronic Control Unit. Brand: A1 Cardone. Fits Years: 2005, 2006, 05, 06. Engine Control Module -- All Calibrations with Module ID LBO-A52, A55, A56; Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required; PATS Module Requires Programming after ECM Install.; Per Ford TSB 10-18-10 or Mazda TSB 0105010, all Coil-On-Plugs (COP) must be replaced when replacing the Powertrain Control Module (PCM). Proof of replacement of all Coil-On-Plugs (COP) are required for Powertrain Control Module (PCM) warranty to be honored; Correct VIN and OE Number required when ordering - 78-1044F

Condition

Remanufactured

Notes

Engine Control Module -- All Calibrations with Module ID LBO-A52, A55, A56; Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required; PATS Module Requires Programming after ECM Install.; Per Ford TSB 10-18-10 or Mazda TSB 0105010, all Coil-On-Plugs (COP) must be replaced when replacing the Powertrain Control Module (PCM). Proof of replacement of all Coil-On-Plugs (COP) are required for Powertrain Control Module (PCM) warranty to be honored; Correct VIN and OE Number required when ordering